You can unpair your Apple Watch without the old iPhone by performing a factory reset on the watch. To do this, open Settings on the Apple Watch, navigate to General, then Reset, and finally, tap ‘Erase All Content and Settings’. This will unpair your Apple Watch and remove all data.

Can you unpair an Apple Watch without the phone it’s paired to?

How to erase your Apple Watch if you don’t have your iPhone –

1. On your Apple Watch, tap Settings > General > Reset > Erase All Content and Settings.
2. Type your password if prompted.
3. For GPS + Cellular models, choose to keep or remove your cellular plan.
   • If you want to pair your Apple Watch and iPhone again, keep your plan.
   • If you don’t want to pair your Apple Watch and iPhone again, remove your plan. If you aren’t going to pair with a different watch or iPhone, you might need to contact your carrier to cancel your cellular subscription.
4. Tap Erase All to confirm. This resets your Apple Watch to the factory settings.

Now you can set up your Apple Watch again, You’ll need the Apple ID and password associated with the watch turn off Activation Lock. Erasing all content and settings erases all media, data, and settings from your Apple Watch, but it does not remove Activation Lock. Published Date: November 02, 2022

How do I remove Apple Watch without iPhone?

How To Unpair Apple Watch without iPhone If you need to unpair your Watch and don’t have access to your iPhone or can’t remember your Apple Watch passcode, follow these steps:

1. Put your Apple Watch on its charger
2. Press and hold the side button as if you were going to power it down
3. Do a firm press on the POWER OFF slider and let go
4. Tap Erase all content and settings

Here’s what you’ll see as you go through the process this way: ‍ Remove iCloud Without iPhone

• Alternately, you can go to Settings → General → Reset to erase and unpair your Apple Watch if you know your passcode, but the option above is faster.
• If you need to erase and unpair your Apple Watch without your iPhone, you can log on to and remove your Apple Watch under Settings → My Devices,
• ‍

: How To Unpair Apple Watch without iPhone

Can I unpair my Apple Watch without my Apple Watch?

How to unpair Apple Watch without iPhone Looks like no one’s replied in a while. To start the conversation again, simply I sold my watch erased the info but didn’t know I needed to unpair it from my phone. I no longer have access to the phone I paired the watch with.

• Hi
• The following steps may help:
• If you have not yet done so, remove the Apple Watch from Find My iPhone online:

• On a computer, in a web browser, go to: > sign in with your Apple ID.
• Open Find iPhone > select All Devices (at the top) > click your Apple Watch.
• Click Erase Apple Watch > Select Next until the device is erased.
• Click “X” next to your Apple Watch.

If you have not yet done so and if the option remains available, also unpair your watch from within the Watch app on your iPhone:

On your iPhone, in the Watch app, go to: My Watch (tab) > tap on the name of the watch (at the top) > tap on the “i” icon next to the watch > if the button is shown, tap on Unpair Apple Watch and follow the further instructions.

1. Having followed the previous steps, ask the new owner to follow these:
2. On their iPhone: close the Watch app (double-press on the Home button, then swipe up on the Watch app preview).
3. Restart both their iPhone and watch, turning both off together, then restarting their iPhone first:
4. Re-try pairing and setting up their watch:

• If the watch remains locked, either:
• Accompany the buyer and the watch to a Genius Bar appointment, taking along your original proof of purchase for the watch.
• Or contact Apple Support (you, not the new owner) and explain that you have been unable to remove Activation Lock from a watch that you have sold / given away to a new owner:
• More information:

Page content loaded

1. Hi
2. The following steps may help:
3. If you have not yet done so, remove the Apple Watch from Find My iPhone online:

• On a computer, in a web browser, go to: > sign in with your Apple ID.
• Open Find iPhone > select All Devices (at the top) > click your Apple Watch.
• Click Erase Apple Watch > Select Next until the device is erased.
• Click “X” next to your Apple Watch.

If you have not yet done so and if the option remains available, also unpair your watch from within the Watch app on your iPhone:

On your iPhone, in the Watch app, go to: My Watch (tab) > tap on the name of the watch (at the top) > tap on the “i” icon next to the watch > if the button is shown, tap on Unpair Apple Watch and follow the further instructions.

• Having followed the previous steps, ask the new owner to follow these:
• On their iPhone: close the Watch app (double-press on the Home button, then swipe up on the Watch app preview).
• Restart both their iPhone and watch, turning both off together, then restarting their iPhone first:
• Re-try pairing and setting up their watch:

1. If the watch remains locked, either:
2. Accompany the buyer and the watch to a Genius Bar appointment, taking along your original proof of purchase for the watch.
3. Or contact Apple Support (you, not the new owner) and explain that you have been unable to remove Activation Lock from a watch that you have sold / given away to a new owner:
4. More information:

I don’t have the old iPhone to unpair my watch and I wanna sell the watch How to unpair Apple Watch without iPhone : How to unpair Apple Watch without iPhone

Can I unpair my Apple Watch without resetting?

Unpair Apple Watch from the paired iPhone – If you have the paired iPhone, unpair your Apple Watch:

Open the Watch app on your iPhone, tap the My Watch tab, then tap All Watches at the top of the screen. Tap the “i” button next to the watch that you want to unpair, then tap Unpair Apple Watch. Tap again to confirm, then wait for the watch to unpair. After Apple Watch unpairs, you can pair again,

How do you factory reset an Apple Watch?

Page 6 – In some cases, you may need to erase your Apple Watch—if you forgot your passcode, for example.

Open the Settings app on your Apple Watch. Go to General > Reset, then tap Erase All Content and Settings. If you have an Apple Watch with a cellular plan, you’re offered two options—Erase All and Erase All & Keep Plan. To completely erase your Apple Watch, choose Erase All. If you want to erase and then restore it with your cellular plan in place, choose Erase All & Keep Plan.

You can also open the Apple Watch app on your iPhone, tap My Watch, go to General > Reset, then tap Erase Apple Watch Content and Settings. If you can’t access the Settings app on your Apple Watch because you’ve forgotten your passcode, put your Apple Watch on its charger, then press and hold the side button until you see Power Off. Firmly press the Power Off slider, then lift your finger. Tap Erase all content and settings. After the reset finishes and your Apple Watch restarts, you need to pair your Apple Watch with your iPhone again—open the Apple Watch app on your iPhone, then follow the instructions shown on your iPhone and Apple Watch. If you have an Apple Watch with a cellular plan, you can remove it at any time.

Open the Apple Watch app on your iPhone. Tap My Watch, tap Cellular, then tap next to your cellular plan. Tap Remove Plan, then confirm your choice. You may need to contact your carrier to remove this Apple Watch from your cellular plan.

: Erase Apple Watch

How do I find out if my Apple Watch is stolen?

If you can’t find your Apple Watch – If you didn’t turn on Find My before your Apple Watch was lost or stolen and your watch isn’t connected to Wi-Fi, cellular, or your paired iPhone, you can’t use it to find your device. However, you can use these steps to help protect your information:

1. Place your Apple Watch in Lost Mode. When your watch is in Lost Mode, your passcode is required before anyone can turn off Find My, erase your watch, or pair it with another iPhone.
2. Change your Apple ID password, When you change your Apple ID password, you can prevent anyone from accessing your iCloud information or from using other services from your missing device.
3. Report your lost or stolen device to local law enforcement. Law enforcement might request the serial number of your device. Find your device serial number,

Find My is the only way that you can track or locate a lost or missing device. If Find My isn’t enabled on your watch before it goes missing, there is no other Apple service that can find, track, or otherwise flag your device for you. Published Date: July 03, 2023 Please don’t include any personal information in your comment. Maximum character limit is 250. Thanks for your feedback.

What if your Apple Watch is already paired?

If you see a watch face when you’re trying to pair: Your Apple Watch is already paired to an iPhone. You need to first erase all Apple Watch content and reset settings.

How do I manually pair my Apple Watch to my new phone?

Page 6 – To use your Apple Watch Series 1 or later with watchOS 5, you need to pair it with an iPhone 5s or later with iOS 12 or later— require an iPhone 6 or later. Setup assistants on your iPhone and Apple Watch work together to help you pair and set up your Apple Watch.

1. Put your Apple Watch on your wrist. Adjust the band so your Apple Watch fits closely but comfortably on your wrist. For information about resizing or changing the band on your Apple Watch, see,
2. To turn on your Apple Watch, press and hold the side button until you see the Apple logo.
3. Bring your iPhone near your Apple Watch, wait for the Apple Watch pairing screen to appear on your iPhone, then tap Continue. Or open the Apple Watch app on your iPhone, then tap Pair New Watch.
4. When prompted, position your iPhone so that your Apple Watch appears in the viewfinder in the Apple Watch app. This pairs the two devices.
5. Tap Set Up Apple Watch. Follow the instructions on your iPhone and Apple Watch to finish setup.

While it’s pairing with your iPhone, your Apple Watch provides tips on how to interact with it. Tap Display, Digital Crown, and Side Button to learn more. You can activate cellular service on your during setup. If you don’t wish to, you can activate it later in the Apple Watch app on your iPhone.

• If you see a watch face when you’re trying to pair: Your Apple Watch is already paired to an iPhone. You need to first,
• If the camera doesn’t start the pairing process: Tap Pair Apple Watch Manually at the bottom of the iPhone screen, and follow the onscreen instructions.

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap your Apple Watch at the top of the screen.
3. Tap next to the Apple Watch you want to unpair, then tap Unpair Apple Watch.

You can pair another Apple Watch in the same way you paired your first one. Bring your iPhone near your Apple Watch, wait for the Apple Watch pairing screen to appear on your iPhone, then tap Pair. Or follow these steps:

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap your Apple Watch at the top of the screen.
3. Tap Pair New Watch, then follow the onscreen instructions.

See the Apple Support article, Your iPhone detects the paired Apple Watch you’re wearing and automatically connects to it. Just put on a different Apple Watch and raise your wrist. You can also choose an Apple Watch manually:

1. Open the Apple Watch app on your iPhone.
2. Tap My Watch, then tap your Apple Watch at the top of the screen.
3. Turn off Auto Switch.

To see if your Apple Watch is connected to your iPhone, touch and hold the bottom of the watch screen, swipe up to open Control Center, then look for the Connected status icon, If your Apple Watch is paired to your old iPhone and you now want to pair it with your new iPhone, follow these steps:

1. Use iCloud Backup to back up the iPhone currently paired to your Apple Watch (see iPhone User Guide for more information).
2. Set up your new iPhone. On the Apps & Data screen, choose to restore from an iCloud backup, then select the latest backup.
3. Continue iPhone setup and, when prompted, choose to use your Apple Watch with your new iPhone.

When iPhone setup completes, your Apple Watch prompts you to pair it to the new iPhone. Tap OK on your Apple Watch, then enter its passcode. For more information, see the Apple Support article, You can transfer your existing cellular plan from your Apple Watch Series 3 (GPS + Cellular) to an Apple Watch Series 4 (GPS + Cellular) by following these steps:

1. While wearing your Apple Watch Series 3 (GPS + Cellular), open the Apple Watch app on your iPhone.
2. Tap My Watch, tap Cellular, then tap next to your cellular plan.
3. Tap Remove Plan, then confirm your choice. You may need to contact your carrier to remove this Apple Watch from your cellular plan.
4. Remove your old watch, put on your Apple Watch Series 4 (GPS + Cellular), tap My Watch, then tap Cellular. Follow the instructions to activate your Apple Watch Series 4 (GPS + Cellular) for cellular.

1. For more information about setup and pairing, see the Apple Support article,
2. If you need to charge your Apple Watch before setup, see,

: Set up and pair your Apple Watch with iPhone

Can you pair Apple Watch to two phones?

Not just your iPhone, Apple Watch set to get multiple pairing options SOON Apple Watch users may get a much-awaited update. So far, Apple Watch is only allowed to be paired with one iPhone at a time. However, you can pair multiple Apple Watch models to the same iPhone.

But sadly, in case you want to sync an Apple Watch to multiple Apple devices, there are limitations. Currently, the Apple Watch’s compatibility with iPad and Mac is restricted. To follow Apple Fitness+ workout routines on an iPad, for instance, the smartwatch must be connected to an iPhone and both devices must be logged in using the same AppleID.

Likewise, users can utilize their Apple Watch to sign in, make payments using, view passwords, and authenticate, Thankfully, these limitations are expected to end soon. This comes from, who has tweeted that Apple has plans to alter the pairing mechanism, which would allow an Apple Watch to sync with various iPhones, iPads, and Macs, rather than being restricted to a single iPhone.

• According to the leakster, the implementation of this change is uncertain, but one possible approach could be through iCloud syncing, similar to how AirPods operate across devices.
• However, it remains unclear whether setting up an Apple Watch with an iPhone would still be necessary before it can sync with other Apple devices linked to the same iCloud account or not.

Although the exact timing of its release and which Apple Watch models will receive it remain unknown, there are speculations that this feature may be incorporated in upcoming updates such as watchOS 10, iOS 17, iPadOS 17, and macOS 14. The leaker suggests that it can be arrived by this year.