How To Thread A Sewing Machine

Do you need two threads for a sewing machine?

Stitch topology – The most primitive sewing machines used a single thread, and executed a chain stitch: Chain stitch: at each stitch, a loop of thread is pulled through the loop left by the previous stitch. This on YouTube shows how a machine does it. The chain stitch is topologically unproblematical because the thread is completely unknotted: tugging at the right-hand end in the image above is enough to undo the entire seam.

  • This makes the chain stitch still useful in closing bags of potatoes, dog food or charcoal briquettes, where easy unraveling is an asset.
  • But that feature is clearly undesirable, for example, in clothing.
  • The first machines that could sew a lock stitch (which will not unravel) were invented in the period between 1830 and 1850.

These machines used two threads to sew a seam. Lockstitch: at each stitch the upper thread links the lower, always in the same direction. If the cloth is removed, the threads can be seen to be evenly twisted, one about the other, with one complete twist per stitch. At first glance, having a machine execute a lockstitch seems topologically impossible.

The machine uses two threads to sew a seam; each thread comes from a spool: the top thread from the spool conspicuously stationed on top of the machine, the bottom thread from the bobbin, hidden inside. How is it possible for the two threads to link, over and over? The answer is that the bobbin is not attached to the rest of the machine,

In early machines the bobbin sits in a bullet-shaped shuttle that passes, at every stitch, through the loop formed in the top thread by the advancing and retreating needle. This can happen because the shuttle floats freely inside the machine. In more modern machines, the bobbin is tucked into a smooth round metal shuttle that stays in one place, although it floats there unsecured.

  • So at each stitch the thread from the top spool can be led completely around the shuttle, picking up the bobbin thread in a twist as it is drawn tight.
  • Two strategies for executing a lock stitch.
  • Left: “Oscillating (or Vibrating) Shuttle.” At every stitch, the shuttle carrying the bobbin (blue thread) passes completely around the loop created by the top (red) thread.

Right: “Rotary Shuttle.” The bobbin (green thread) is enclosed in a smooth circular shuttle which stays fixed, while at every stitch the top thread (yellow) is drawn completely around it. In either case, for this to be topologically possible, the shuttle must be floating free inside the machine.

Do you need a bobbin to sew?

Every sewing machine requires a bobbin to sew. However, the bobbin mechanism varies by brand. The bobbin fits into the arm of the machine and is ‘dropped in’ by removing a plate in front of the presser foot. The thread is then pulled through the bobbin mechanism to get ‘picked up’ by the needle.

Where should thread be on sewing machine?

To do this, place a spool of sewing thread on your machine’s thread pin (at the top of your machine). Pull the thread to the left of your machine and wind it counter-clockwise around the pre-tension disc (attached to the thread guide).

Do both threads go through the needle on a sewing machine?

Tips for Practicing Threading the Machine –

  • Start with inserting the bobbin. Do this enough times that you can do it without looking at the manual or quick start guide.
  • Once you feel comfortable inserting the bobbin in the machine, practice threading and rethreading the top spool.
  • Make sure to practice pulling up the bobbin thread through the needle plate too.

Tip: When you remove the top thread from the machine, cut the thread at the top, grasp the end near the needle, and pull it through the machine. This helps keep thread fibers out of the inside of the sewing machine. Top picture: Cut the thread at the top. Bottom picture: Pull the thread from the bottom.

Do you always need bobbin thread?

Does The Bobbin Thread Matter? – Yes, the bobbin thread is an essential part of making a seam, as it works together with the top thread to create the stitches that hold the fabric together. However, it is not always necessary to match the color of the bobbin thread to the top thread.

  1. This is because the bobbin thread is only visible on the backside of the seam, while the top thread is visible on the right side of the fabric.
  2. For example, when doing machine embroidery, you may choose to use a white color thread in the bobbin, even if you are using different colors for the top thread, as the bobbin thread will not be visible on the right side of the fabric.

It is important to ensure that the bobbin thread is of good quality and properly wound and threaded, as this can affect the quality of the stitching and the overall look of the finished project.

Does thread matter when sewing?

What Difference Does Thread Make? When it comes to a successful sewing experience, the most important things are your sewing machine and the fabric – but the thread you use is just as important. There really is a visible difference between “cheap” thread and “good” thread – one that makes up for the difference in cost many times over.

You might be interested:  How Many Days Until New Years?

Think about it – you bought a sewing machine that may have cost thousands of dollars, you bought fabric that might cost over $12 a yard, and you’re worried about spending $2.99 on a decent spool of thread?? The cheaper threads are usually made from the cheapest “scrap” fibers, rather than the smoother, better quality long fibers found in the better threads.

The difference is easily visible when you look at the threads – the el-cheapo special thread is much more uneven, with thick spots & thin spots, fuzzy fibers, and large degrees of inconsistency in thickness. “So What?” you say? You wouldn’t buy an expensive automobile and expect it to perform at its best when you feed it the cheapest gas you can find, so why would you expect you expensive sewing machine to sew perfectly with imperfect thread? Fuzzy thread can cause poor stitching, poor or inconsistent tension (you can even see differences from one stitch to the next), and can leave more lint inside your sewing machine that quality thread does.

Is it better to double thread?

Threading a needle – Hold the needle with the eye up in the air, pull the thread from the spool and slide it into the needle’s eye.

Some useful tips you really need to know about threading the needle. You can use a special tool – a needle threader for hand sewing. In this case slide the loop into the eye of the needle, place the thread into the loop and pull the threader out of the needle.

I usually lick the thread’s end before, it goes easier this way; not the best practice in the world. But you can use a little hairspray to make the end of the thread perfectly smooth. The thread’s ends have to be cut with sharp scissors at a 45-degree angle. Don’t break threads with your hands or with your teeth if you don’t want problems with threading the small needle eye. A messy edge will be hard to thread. For any hand sewing, the length of the thread has to be about 45-80 cm (18-32 in). A too-short thread is not good because you will have to change it often, a thread too long will be snagging or kinking.

To prevent snagging you should thread your needle with the thread end that comes off the spool and tie the knot on the end you cut. This way the twist of the thread will be working with you not against you. Threading can be done with single or double threads. In most cases, we use a single thread for sewing because a double thread kink is easier. But sometimes it is better to have it double, for example for putting buttons, because it will speed up your sewing. Some people use beeswax to smooth the thread so it slides through the fabric easier and doesn’t kink or knot. Just draw your thread through the edge of the wax and smooth it with your fingers a couple of times for even distribution. But I advise you not to use the wax for very light or fine fabric because sometimes wax can melt and stain the fabric.

Some people recommend using dryer sheets instead of beeswax. Just rub your thread with it and tangling will not happen. Make sure your thread diameter and needle diameter match.

I have a detailed video tutorial on how to thread a needle for hand sewing, Check out my YouTube video too!

Why is threading a sewing machine so complicated?

How to Thread Sewing Machine Needle Hack – Threading a needle doesn’t always require a fancy gadget. There are a few different ways to thread a sewing machine other than using tools. Here are 5 simple thread sewing machine needle hacks that you can easily accomplish with utensils you already have at home:

Use tweezers to grab the thread when it has gone through the eye of the sewing machine needle to give more control to thread.Take out the needle from the sewing machine and use an old toothbrush. Place the thread on top of brush and lay the needle eye slightly push down to catch the thread to go through the eye. Use another needle to pull the thread through.Fold the thread around the shaft of the needle. Slide thread off and pinch the fold. Stick the thread in the eye of the needle so the folded part is all the way through.Cut a very thin length of the paper or card stock about 1½” long and ¼” wide. Fold the strip in half and place the end of the threader within this fold and slide the threader containing the thread.Layer the thread across your palm and place the eye of the needle over the thread and gently rub back and forth steadily. When the loop of the thread forms through the eye of the needle, pull it through.

There are various ways of threading a needle, including methods without using special tools. Whether you are using a delicate thread or heavy duty needle, these needle threading hacks will work well overall.

Why is it so hard to thread a needle?

Utilizziamo i cookie per personalizzare contenuti e annunci, per fornire funzionalità sui social media e per analizzare il nostro traffico. Condividiamo inoltre informazioni sull’uso del nostro sito con i nostri social media, pubblicità e analytics partner. Vedi dettagli Vedi i dettagli This page contains affiliate links. Visit here or here to learn more. Do you find it challenging to thread a needle? You are not alone, my friend. It can be hard getting that wimpy thread to push through the teeny, tiny eye of a needle. The primary problem is that the thread is limp.

  • It droops and bends and splits, and generally behaves like it has a mind of its own and is actively resisting you.
  • It can be so aggravating.
  • I’m going to show you 3 easy ways, starting with the EASIEST way, to thread a needle.
  • Read on! But let me show you this cool floss hack so you can separate the strands of embroidery floss without any tangles.
You might be interested:  How Many Days Has It Been Since January 1St?

NOW you’re ready to move on. Check out this 3 minute video for a quick tutorial on 3 different ways to thread your needle. Then read below for more detail.

How to do threading step by step?

Download Article Fabulous eyebrows are only a few twists away with our expert guide to threading at home Download Article If you want to master threading, also known as “tying” or “khite” in Arabic, you’re in the right place! This ancient temporary hair removal method is a popular way to rid yourself of any peach fuzz on your lips, cheeks, and chin, not to mention perfect a pair of bushy brows.

  • Make a loop by folding 11 inches (28cm) worth of thread in half and tying the ends together.
  • Put one hand inside each end of the looped thread, with your palms up, before rotating your hands 6-7 times to create a circle of twisted thread in the middle of your loop.
  • Twist one hand clockwise and one counterclockwise to create a rolling and twisting thread motion in the middle. Align the twists of thread under the hair you want to remove.
  • Open the fingers of your right hand to move the thread down or the fingers of your left hand to move the thread up. Twist the center of the loop to pluck out the hair.
  1. 1 Use threading to remove facial and body hair. Threading is a temporary hair removal technique primarily used for excess hair removal on the eyebrows, lips, cheeks, chin, and legs. Although it may seem complicated, learning to remove unwanted hair at home is easy with a bit of patience and practice. Threading your eyebrows has several advantages over other methods, such as the following:
    • Threading eyebrow hair is faster and less painful and irritating than tweezing or waxing, not to mention it’s more effective at removing the tiny, almost invisible hairs you might miss with tweezers.
    • Threading your eyebrows is faster and cheaper than at-home wax kits. If you learn how to thread yourself, you’ll save a lot of money, as an inexpensive thread will cost around $1.
    • See a professional if you’re not confident in your ability to thread your eyebrows yourself. Improper threading technique could result in injury or total damage to your eyebrow shape and unwanted hair loss.
  2. 2 Get a lash comb and grooming scissors. You will need a lash comb, and a pair of small grooming scissors to aid you in threading your eyebrows at home. Use the lash comb to brush the eyebrow hair in place and the scissors to trim any lengthy hairs. The best part is, these items are inexpensive and easily accessible, as you likely already have most of them at home.
    • Dusting your brows with baby powder or loose setting powder before threading can be beneficial, as it makes hair easier to pull out.


  3. 3 Use cotton thread. Thread is the most important tool you will be using to shape your eyebrows properly. The key is to only use 100% cotton thread, as it’s less likely to snap, making the threading process much easier.
    • Use a piece of thread around 11 inches (28 cm), or the length of your forearm plus 3 extra inches (2.6 cm). The less string you use, the more control you will have.
  4. Advertisement

  1. 1 Choose your brow shape carefully. Using an eyebrow pencil to outline and fill in your eyebrows exactly how you want them will help you to ‘stay in the lines’ when you’re threading and prevent you from removing too much hair. Map your desired brow shape by marking the following 3 measurements to use as a guide for where not to thread:
    • Find the inside limit of the brow by measuring a straight line from the corner of the nose to the inside corner of your eye.
    • Determine the outside limit of the brow by measuring the edge of the nose to the outside edge of the eye.
    • Find the highest arch of the brow by measuring the outside edge of the nose through the pupil.
  2. 2 Sweep your eyebrow hair upward using a lash comb. Work on your eyebrows one section at a time by combing the front of the brow, then the arch, and finally, the tail with your lash comb,
    • Use your grooming scissors to carefully trim the hairs that extend over the line you’ve mapped. Then, sweep your eyebrows downward, and snip any particularly long hairs that stand out.
    • Don’t overdo it. When in doubt, cut less hair than you think is necessary.
    • Finish by combing your eyebrow hair back into place.
  3. 3 Tie the thread into a big loop. Tie a large, loose loop with your 11-inch (28 cm) thread to prepare for the threading process. Fold the thread in half, then tie the ends of the thread together. The 100% cotton thread is what you’ll be using to pull out and shape your eyebrow hairs.
  4. Advertisement

  1. 1 Twist the thread loop in the middle. Start by stretching the loop between your hands. Stretch the thread between your thumb and index fingers and do the following:
    • Put one hand inside each end of the looped thread, with your palms up, before rotating your hands several times. It might be enough to rotate them twice, although some experts suggest as much as 15 times.
    • Twist one hand clockwise and one counterclockwise to twist the thread 6 or 7 times until you have about 1 inch (2.5 cm) of intertwined thread between your hands.
    • When you open up your palm and fingers with the thread around them, you will create a circle of thread at each end with twisted thread in the middle.
  2. 2 Test the thread. Hold the string with your thumbs and index fingers inside the loops on each side, then pull your right thumb and index finger apart. This threading motion traps hairs in the twisted thread and pulls them out.
    • Open and close your hands to move the thread. Place your hand inside the thread loop when you open it so that part of the thread is on top and the other part of the thread is on the bottom of your hand.
    • Close the space between your right thumb and index finger and open the space between your left thumb and index finger. The twists of the thread will move toward your left hand.
  3. 3 Position the thread under the hair you want to remove. After practicing your threading technique, you’re ready to shape and remove your brow hairs. Open up the loop and hand in the opposite direction that you want to thread (left hand to thread to the right; right hand to thread to the left).
    • When you open and close the loops, the twisted portion of the thread will tug out the hair.
    • Applying a light dusting of baby powder across your eyebrows might make it easier for the thread to pull out your hair.
  4. 4 Grab the unwanted hairs with your thread. As you twist the center of the loop, the twisted threads will pluck out the hair. Some experienced practitioners will hold the thread in their mouth while manipulating the other ends of it with both hands. Others hold each end of the thread in a different hand.
    • Starting at the highest hairs you want to remove, align the twists of thread to that hair. Open your right fingers smoothly, moving the thread down, and then open your left fingers to move the thread back.
    • Continue these motions, working from top to bottom, aligning the coil of thread carefully before rolling it up and down the removal area until all the unwanted hair is gone.
    • This same threading technique can remove unwanted facial and body hair, such as above the lip or on the legs. Areas other than your eyebrows don’t need mapping—simply roll the thread from top to bottom over the entire area to remove the unwanted hair.
    • Thread at whatever pace works best for you. Experienced practitioners can do this process very quickly, but when you’re first starting out, it’s best to take your time and go slow.
    • The results of threading can last about 2-3 weeks.
  5. Advertisement

Add New Question

  • Question What are the disadvantages of threading? Melissa Jannes is a Licensed Esthetician and the owner of Maebee’s Beauty Studio in Philadelphia, a single practitioner space providing quality services with individualized attention. Melissa is also a National Educator for Universal Companies. She received her esthetics degree at The Beauty School of Middletown in 2008 and is licensed in both New York and Pennsylvania. Licensed Esthetician Expert Answer Well, some people think that it hurts and it can be kind of difficult to do it on your own.
  • Question Is threading better than waxing? Melissa Jannes is a Licensed Esthetician and the owner of Maebee’s Beauty Studio in Philadelphia, a single practitioner space providing quality services with individualized attention. Melissa is also a National Educator for Universal Companies. She received her esthetics degree at The Beauty School of Middletown in 2008 and is licensed in both New York and Pennsylvania. Licensed Esthetician Expert Answer I don’t know if I’d say it’s better or worse. This comes down a lot of the times to personal preference. In my opinion, threading, waxing, and tweezing will all have fairly identical results.
  • Question Can I get a clean, professional look if I thread at home? Melissa Jannes is a Licensed Esthetician and the owner of Maebee’s Beauty Studio in Philadelphia, a single practitioner space providing quality services with individualized attention. Melissa is also a National Educator for Universal Companies. She received her esthetics degree at The Beauty School of Middletown in 2008 and is licensed in both New York and Pennsylvania. Licensed Esthetician Expert Answer It’s going to be pretty challenging. I generally recommend that people go see a professional if they want a clean threading job.

See more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • Wait 2 hours before applying makeup or lotion to the threaded area. Threading can disturb your skin’s barrier, making it more susceptible to contracting viruses or bacteria.
  • Some people use the threading to remove splinters (although not from a hand, as you need both hands to do the threading).
  • Experiment with different thread lengths or brands if you find the thread difficult to use.

Show More Tips Advertisement Article Summary X To thread your eyebrows, start by tying some 100% cotton sewing thread into a large loop. Stretch the loop between your hands, put one hand inside each end of the loop with your palms up, then rotate your hands several times to twist the center of the loop.

  • Next, place the thread right under the brow area that you want to style.
  • To use the thread to pluck your brows, open and close the loop to gently tug the hair out.
  • To learn how to shape your eyebrows in preparation for threading, keep reading! Did this summary help you? Thanks to all authors for creating a page that has been read 1,577,071 times.

If you buy through links on our site, we may earn a commission.

Should you turn off the sewing machine when threading the needle?

– Do not pull or push fabric while stitching. It may deflect the needle causing it to break. -Wear safety glasses. – Switch the sewing machine off (‘O’) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.

How do you thread a sewing machine needle with poor eyesight?

You can cover the surface with a contrasting placement or use a flat, rubberized mat or jar opener that provides extra traction and stability for your needle threading materials. If you have low vision, make sure that the lighting in your sewing area provides sufficient illumination.