How To Cut The Sleeves Off A Shirt?

Contents

1 Can you just cut the sleeves off a shirt?
2 Will my shirt unravel if I cut it?
3 Do shirts have to have sleeves?

Can you just cut the sleeves off a shirt?

How to Turn a T-Shirt Into a Tank Top – Start by selecting a t-shirt and laying it out flat on a clean surface. Using another tank top as a guide, align it with the t-shirt, ensuring both are centered and even. Pin the tank top to the t-shirt to keep it secure. Place straight pins all along the edges of the tank top, taking care to pin all layers of both shirts.

With a sharp pair of fabric scissors, carefully cut away the sleeves and collar of the shirt. If concerned about symmetry, fold the t-shirt in half lengthwise and remove both sleeves simultaneously. After the sleeves have been removed, create the desired neckline by cutting away the original collar. For a finished look, fold the edges of the cut fabric under and sew in place using a sewing machine or by hand.

Finally, try on your new tank top for fit and make any necessary adjustments. Enjoy your transformed t-shirt!

Will my shirt unravel if I cut it?

Download Article Download Article If you have an oversized shirt that you wish looked different, don’t throw it away! There are lots of ways to convert a baggy, oversized T shirt into something trendy and new. With a little bit of cutting and DIY, you can transform the shirt into a chic racerback shirt or a trendy tied shirt.

1 Cut the collar off at the stitching. Begin cutting the collar at the front-left side, and work your way towards the right side. Continue cutting along the back of the collar until you are back where you started.
- Use the stitching line as a guide. It’s best to cut just below the seam.
- Do not cut through both layers of fabric at once, or the back of the collar will be too low.
2 Snip the cut-off collar apart to make a long strip. Take the collar that you just cut off from your shirt. Cut it apart to make a long strip of fabric, then set it aside for later. You will use this to bind the racerback in the end. Advertisement
3 Cut the front of the collar lower if you want a more feminine touch. Fold the front of the shirt in half lengthwise so that the back is still loose. Make sure that the cut edges of the front collar are lined up. Begin cutting about 1 inch (2.5 cm) below the cut edge of the collar, and finish cutting at the side edge. Unfold the shirt when you are done.
- Follow the curve of the collar as much as possible.
- You are cutting more of the collar off in the beginning and less towards the ends.
4 Cut the sleeves off, starting a least 1 inch (2.5 cm) below the armpit. Begin cutting the sleeve off 1 inch (2.5 cm) below the armpit and finish cutting at the shoulder seam, right where the sleeve connects to the shirt. Do the left sleeve first, then fold the shirt in half, and use the cut edge as a guide for the right sleeve.
- You can start cutting the armpits as low as you want. The lower you cut, the more revealing the top will be.
- If you want narrower shoulders, finish cutting closer to the collar.
5 Pinch the back of the shirt to create a racerback shape. Keep the shirt with the back facing you. Slide your fingers through 1 armhole and your thumb through the other. Close your hand to gather the fabric between the 2 armholes together.
6 Wrap the cut-off collar around the pinched fabric at armpit-level. Take the end of your cut-off collar strip, and place it against your gathered fabric. Make sure that it is level with the armpits of your shirt, then begin wrapping it tightly.
- The more you overlap the collar strip, the narrower the binding will be.
7 Secure the end of the collar strip. Once you reach the end of the collar strip, you’ll need to secure it somehow. There are a few ways that you can do this:
- Glue the end of the strip to the inside of the shirt with fabric glue, then let it dry.
- Hand sew the end of the strip to the inside of the shirt with a few simple stitches.
- Thread the end of the strip under the wrapped strip to secure it.
8 Try on your shirt. If you want to step things up a little, you can cut the bottom hem off to complete the cut-off look. For an even nicer finish, gently pull along all of your cut edges. This will cause the fabric to curl and conceal any jaggedness.

1 Get a T shirt that is a few sizes too big for you. The length of the shirt does not matter because you will be cutting it. The shirt should fit you well in the shoulders, but it needs to be loose in the waist and hips.
2 Cut off the collar. If you want a larger collar, cut through both layers of fabric, using the front collar’s seam as a guide. If you don’t want a larger collar, then cut all the way around the collar from left shoulder to right, then back to the left again.
3 Cut the bottom hem off. Spread the shirt out on a flat surface, then cut straight across the bottom. Cut right above the stitching on the hem if you like the length. If you want to make the shirt shorter, then cut it shorter.
4 Figure out how tight you want the shirt to be. Measure around your waist, then divide that number by 2. Add 3 inches (7.6 cm) to this new number to make the ties. This will be the new width of your shirt. For example, if you measure your waist and get 28 inches (71 cm):
- 28 inches (71 cm) divided by 2 = 14 inches (36 cm).
- 14 inches (36 cm) plus 3 inches (7.6 cm) = 17 inches (43 cm).
- 17 inches (43 cm) = your new shirt width.
5 Transfer the new width measurement to your shirt. Mark the new measurement on your measuring tape with your finger. Place the measuring tape on your shirt at about waist-level. Make sure that the tape is centered, then make a mark at each end with a pen or a piece of chalk.
- Make the first mark at the beginning of the measuring tape.
- Make the second mark at the measuring tape where your finger is.
6 Cut the sides of the shirt from shoulder-to-hem. Begin cutting at the bottom corner of the left hem, right next to the side seam, and finish cutting at the shoulder seam. Curve the line inward as you cut so that it touches the first mark that you made. Once you finish the left side, repeat the process for the right.
- If you want your shirt to have some sleeves, finish cutting 1 to 2 inches (2.5 to 5.1 cm) away from the shoulder seam, on the actual sleeve part.
- You can also fold the shirt in half after cutting the left side, then use the cut edge as a guide for cutting the right side.
7 Cut evenly-spaced slits into the side of the shirt, from hem to armpit. Make these slits about 1 ⁄ 2 to 1 inch (1.3 to 2.5 cm) wide. If you want the shirt to be super tight, make the slits 3 inches (7.6 cm) long. If you want the shirt to be fitted but somewhat loose, make the slits 1 1 ⁄ 2 inches (3.8 cm) long instead.
8 Tie the strands in the front of the shirt to the strands in the back. If you want the tassels to be visible, keep the shirt turned right-side-out. If you don’t want the tassels to be visible, turn the shirt inside-out first. Tie the strands in the front of the shirt to the matching strands in the back in a tight, double-knot.
9 Trim the tassels if you tied them inside the shirt. You don’t have to do this, but it will help the shirt lay smoother. You also don’t have to worry about them tickling your sides. Simply cut them as close as possible to the knots. Turn the shirt right-side-out when you are done.
- Skip this step if you tied the strands on the outside of the shirt.

1 Cut the hem off the sleeves to complete a cut-off look. If you cut the collar and/or bottom hem off, you might want to cut the hem off of the sleeves as well. This won’t change the length of the sleeves by much, but it will help make them look more consistent with any other alternations that you did to your shirt.
2 Create a cap-sleeve look by cutting the sleeves off at an angle. Begin cutting 1 to 2 inches (2.5 to 5.1 cm) from the top of the shoulder seam, and finish cutting 1 ⁄ 4 to 1 inch (0.64 to 2.54 cm) from the armpit seam. Fold the shirt in half so that the shoulders match up, then use the cut sleeve as a guide for cutting the second sleeve.
- Do not cut into the shirt. You only want to cut the sleeve.
- Pull along the cut edges of the sleeves to make the fabric curl inward. This will hide any unevenness.
3 Cut the sleeves off at the seam for a sleeveless look. If you cut just inside the seam, toward the body of the shirt, the fabric will curl inward when you pull on it. If you cut just outside the seam, the fabric will fray a little instead. This is great if you want an edgier look. Do 1 sleeve first, then the other.
4 Extend the cut below the armpits for a trendy look. Begin cutting the shirt just inside the shoulder seam and finish cutting a few inches/centimeters below the armpit. Fold the shirt in half, then use the cut edge as a guide for cutting the other side.
- How far down you cut is up to you. If you finish cutting a few inches/centimeters from the bottom hem, pair the shirt with a tank top or bandeau.
5 Pull on the cut edges to curl them in and hide any jaggedness. T shirt material does not fray, so you don’t have to hem it. The cut edges can look uneven, but you can fix that by gently tugging apart the cut edges. This will cause the fabric to curl inward and give you a cleaner look.

1 Cut the collar off at the seam to complete any cut-off look. If you like the size of the collar, but want it to match your cut-off sleeves and hems, all you have to do is cut it off. Begin cutting at the left side of the collar, then work your way around the front towards the right. Continue cutting along the back of the collar until you’re back where you started.
2 Create a scoop neck by cutting the front collar lower. Cut the entire collar off first. Next, fold front of the shirt in half lengthwise so that the back is still loose. Begin cutting about 1 to 2 inches (2.5 to 5.1 cm) below the collar, and finish cutting at the top edge of the collar.
- Don’t lay the shirt flat and cut the collar through both layers of fabric. If you do that, the back will be too low.
- Follow the curve of the collar for a traditional scoop neck. Cut in a straight line for a V-neck.
3 Extend the collar towards one shoulder for an off-the-shoulder look. Cut the entire collar off first. Choose a shoulder that you want to expose. Find the center of your collar, then cut towards that shoulder seam. Make sure that you cut through both layers of fabric.
- Remember, your left shoulder will be the shirt’s right shoulder, and vice-versa.
4 Cut the bottom hem off to finish any cut-off look. Spread your shirt on a flat surface. Make sure that the bottom hems in the front and back match up. Cut the hem off just above the stitching. Start cutting on one side of the shirt and finish on the other.
- If you want a crop top, then decide how short you want the shirt to be, and cut the hem off at that point. Belly-button level is ideal.
5 Cut the front of the shirt shorter than the back to create a high-low look. Flatten the shirt so that 1 of the side seams is visible, and you have a fold along the front-center and back-center of the shirt. Begin cutting along the back folded edge at an upward angle towards the front folded edge.
- How high up the front folded edge you cut depends on how short you want the shirt to be in the front.
- Begin cutting about 1 inch (2.5 cm) above the back hem. This way, you won’t retain any of the original stitching and create a more consistent look.
6 Cut the hem shorter along the side seams for a scooped look. Cut the entire bottom hem off first, then fold your shirt in half so that the side seams match up. Begin cutting at the side seam, about 2 to 3 inches (5.1 to 7.6 cm) from the bottom hem. Cut in a curve towards the folded edge, stopping at the hem. Open up your shirt to reveal a rounded hem that’s longer in the middle and shorter on the sides.
7 Pull along the cut edges to make the fabric curl inward. You don’t have to do this at all, but it will hide any unevenness and give you a nicer finish. Simply tug apart the fabric along the cut edges to make the fabric to curl inwards.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Practice cutting on old T shirts you don’t care about. This way, if you mess up, it won’t be that big of a deal.
It is better to cut too little off than too much. You can always go back and cut more off, but you can’t add more back!

Thanks for submitting a tip for review! Advertisement

Large T shirt
Measuring tape
Fabric scissors
Needle and thread or fabric glue

Large T shirt
Measuring tape
Chalk or pen
Fabric scissors

Large T shirt
Measuring tape
Fabric scissors

Large T shirt
Measuring tape
Fabric scissors

Article Summary X To cut an oversized T-shirt, try turning it into a racerback tank. Cut off the collar and sleeves, then pinch the back to form the racerback shape. Tie the collar around the back of the shirt to hold it in place. You can also cut the sleeves and collar off the T-shirt for a casual look.

Why is it called wife beater?

Tank top – Sayali Sanjeev wearing a sleeveless top. A man wearing an A-shirt In the United States and Canada, any casual sleeveless shirt can be called tank top or tank shirt, with several specific varieties. It is named after tank suits, one-piece bathing suits of the 1920s worn in tanks or swimming pools.

The upper garment is worn commonly by both men and women. The build of a tank top is simple: the neck and armholes are often reinforced for durability. One usually has large armholes and neck holes and a neckline that can reach down as far as the bottom of the chest. (Women’s tank tops have smaller holes, to conceal their breasts).

They are also sometimes made long to make tucking into pants easier. In almost all cases, they are buttonless, collarless, and pocketless. A sleeveless T-shirt, also called a muscle shirt, is the same design as a T-shirt, but without sleeves. Some sleeveless T-shirts, which possess smaller, narrower arm holes, are traditionally worn by both women and men.

They are often worn during athletic activities or as casual wear during warmer weather.
They are colloquially known as shooter shirts in the southern United States.
They were quite popular in the 1980s and were commonly associated with surfers and bodybuilders (hence the name “muscle” shirt) and often bore the names and logos of gyms.

Such shirts without logos are now more commonly worn as casual wear. The tank top designed for a tight fit and often made of ribbed cotton is also colloquially called an A-shirt, or, more offensively, wifebeater, beater, guinea tee or dago tee ( guinea and dago being American ethnic slurs for people of Italian ethnicity).

The term wife-beater reportedly became synonymous for an undershirt after a 1947 criminal case where a Detroit man was arrested for beating his wife to death, and newspapers printed a photo of the ” wife beater ” wearing a stained undershirt.
Another claim was spread by Paul Davidson, a film-maker, in a blog post where he claimed that the term had evolved from a medieval chain mail undergarment called a “waif-beater,” and this was picked up as fact by other outlets.

Davidson openly admitted in 2018 that the waif-beater story was bogus, created to trick people who believed unquestioningly anything they read on the Internet. In the UK, especially when used as an undershirt, it is known as a vest (compare the American usage of vest ).

It is called a singlet in Australia and New Zealand, and a banian or banyan in the Indian Subcontinent. In addition to athletic usage, tank tops have traditionally been used as undershirts, especially with suits and dress shirts. They are sometimes worn alone without a dress shirt or top shirt during very warm and/or humid weather.

Tank tops are often worn alone under very casual settings, as lounge wear, and/or while completing yard work or other chores around the home.

Can tailors cut sleeves?

16 Clothing Alterations Tailors Can do for Men It has been said that the clothes can make the man, and certainly being well-dressed goes a long way to boosting self-esteem, looking better, and getting noticed on the job, at a party or at any other social event.

If you happen to be able to afford a custom bespoke suit, that is great news. After all, there is no greater eyesore than a man with great intentions without the clothing to match. On the other hand, suppose you are beginning an entry-level position and do not have the extra cash for a hand-crafted wardrobe solution.

You could instead consider purchasing items like jackets, pants, and shirts off the rack. With a few professional alterations from a qualified tailor, you can be every bit as well-dressed. Here is a guide to exactly what a tailor can do for your jackets, pants, and shirts.

Jacket When purchasing a new jacket off the rack, the most difficult things for a tailor to adjust are the width of the shoulders and the overall length.
Try to get these two dimensions as close to a proper fit as possible.
That said, almost every other aspect of your jacket can be tailored.
Narrow the Sleeves The sleeves on your jacket should not be tight to your wrists, but they should also not be baggy or drooping.

A slim fit is the ideal objective. A tailor can narrow your sleeves to a proper fit. Shorten the Sleeves When your hands are at rest by your sides, a half-inch of your shirt should be exposed. By releasing some of the inlaid fabric in your jacket, a tailor can help you to achieve this ideal sleeve length.

At Love Your Tailor in Toronto expect to pay roughly $40 to get your sleeves shortened to the perfect length. Adjust Jacket Length There is no rule set in stone with respect to the length of your jacket. Generally speaking, it should be long enough to cover your behind. As mentioned above, this type of alteration can be tricky for a tailor, so attempt to pick a jacket of the correct length in the first place.

Reduce the Shoulder Width The shoulder pads in your jacket should end with your shoulders. Again, it is best to select a jacket off the rack that matches your shoulder width as closely as possible. This can be a more costly alteration for a tailor to perform and it can only be adjusted marginally.

If you need the width of your shoulders increased, forget about it. Even the most experienced tailors will have difficulty doing this well. Replacing the Buttons If you purchased a jacket on discount, it may have loose buttons, or buttons that do not match the style you are after. A tailor can replace the buttons on your jacket, but be certain to do them all at once to get any savings.

Remember at Love Your Tailor in Toronto you can get 30% off on clothing & by experienced tailors in Toronto.

Suppress the Waist
Depending upon the number of vents your jacket has, the waist can be taken in or ‘suppressed’ to give you a sought after V-shape.
Pants

In most respects, pants can be easily altered by a tailor for the perfect fit. Pants that you consider to be too tight or the incorrect length can easily be salvaged. Just pay careful attention to the seat and rise, as these aspects can be much more difficult for a tailor to adjust.

Length, Cuff & Break Adjusting the length of a pair of pants purchased off the rack is the most common alteration performed by tailors.
Most off the rack suit pants will need to be hemmed to an appropriate length.
At Love Your Tailor in Toronto we charge roughly $20 for shortening pants.
When adjusting the length of your pants, a tailor can also cuff them to give you a more modern look.

Also, based on your personal preferences, you could consider a full break at the top of your heel and a natural break over the top of your shoe. Adjust the Waist The waist of your pants can be taken in or let out. There is no exact ratio or measurement to follow here.

Simply put, you should be able to comfortably stand, sit and walk around.
Narrow the Legs If you prefer a more modern, slim look, consider having your tailor pull in the fabric around your shin up through your thigh.
This will narrow the leg of your pants for a more tapered appearance.
Change the Zipper Whether your zipper needs replacement because it is broken, or you simply do not like the style, this is a very common alteration that tailors can do.

At Love Your Tailor expect to pay $20 for a new zipper. Adjust the Rise The rise of your pants, essentially where the legs meet the crotch, can be adjusted by only an inch or so in either direction before the pockets need to be moved. This is why it is recommended to pay careful attention to the rise of the pants before purchasing them off the rack.

Shirts A lot of men do not realize the world of possibilities when it comes to altering dress shirts. Even shirts you are already wearing can be easily tweaked for a more professional fit. Shorten the Sleeves The sleeves of a dress shirt can be shortened an inch or two by an experienced tailor. Replace Cuffs & Collars The collar of your shirt can be easily replaced, although you may need to accept a white collar for contrast.

It is unlikely the tailor will have fabric that perfectly matches your shirt. The cuffs of your sleeves can be replaced the same way. At Love Your Tailor we have a large selection of popular fabric and our tailors usually have no problem matching the colour of your dress shirt.

Shorten Torso Length
The length of your shirt can be easily shortened by a few inches for a better fit.
Slim the Fit

A dress shirt should fit your torso properly without being tight, or without taking on the billowy shape of a light summer dress. Ask your tailor to take in the shirt for a slim, narrow, and modern fit. Each body is different, so a knowledgeable tailor will know what fit will look best based on your body type.

Replace the Buttons When your shirts are being laundered, it can be quite common to discover lost or damaged buttons. Consider asking your tailor to replace all the buttons on your shirt. With a large variety of buttons, our experienced tailors in Toronto can make your shirt look even better than when you bought it by adding more stylish buttons.

At Love Your Tailors in Toronto we charge only $3.50 to professionally replace buttons Find a Tailor You Trust The clothing you wear is a very personal thing. As such, it is important to choose a tailor that you trust and feel comfortable working with, as well as a reputable one that has over a decade of experience.

Why do shirts curl when cut?

Improper Construction of the Garment – Curling and creasing can occur if the fabric of the clothing or linen is not hemmed following the straight grain of the fabric. If the garment or piece of fabric is not cut out following the grain of the weave or the hem is crooked, the hem can become misshapen during washing.

This is very difficult — if not impossible — to correct. Curling can also happen if the type of thread used in hemming is a different fiber content than the fabric of the garment. One hundred percent cotton thread is going to react differently than a polyester-cotton blend or a polyester piece of fabric when subjected to the rigors of washing and drying,

You may be able to solve the curling issue if you re-hem the garment or table linen with the proper type of thread that matches the fiber content of the fabric.

Can you cut the sleeves off a long sleeve shirt?

Removing your shirt’s sleeves takes just a few minutes. Although spending money on a new tank top is easy, you can repurpose your old shirts for free by cutting off the sleeves. Depending on the design of the shirt, you can easily remove its sleeves to convert it into a sleeveless top, as long as you have a sharp pair of shears to cut cleanly through the fabric.

Can tailors cut sleeves?

If you happen to be able to afford a custom bespoke suit, that is great news.
After all, there is no greater eyesore than a man with great intentions without the clothing to match.
On the other hand, suppose you are beginning an entry-level position and do not have the extra cash for a hand-crafted wardrobe solution.

Jacket When purchasing a new jacket off the rack, the most difficult things for a tailor to adjust are the width of the shoulders and the overall length.
Try to get these two dimensions as close to a proper fit as possible.
That said, almost every other aspect of your jacket can be tailored.
Narrow the Sleeves The sleeves on your jacket should not be tight to your wrists, but they should also not be baggy or drooping.

At Love Your Tailor in Toronto expect to pay roughly $40 to get your sleeves shortened to the perfect length.
Adjust Jacket Length There is no rule set in stone with respect to the length of your jacket.
Generally speaking, it should be long enough to cover your behind.
As mentioned above, this type of alteration can be tricky for a tailor, so attempt to pick a jacket of the correct length in the first place.

If you need the width of your shoulders increased, forget about it.
Even the most experienced tailors will have difficulty doing this well.
Replacing the Buttons If you purchased a jacket on discount, it may have loose buttons, or buttons that do not match the style you are after.
A tailor can replace the buttons on your jacket, but be certain to do them all at once to get any savings.

Remember at Love Your Tailor in Toronto you can get 30% off on clothing & by experienced tailors in Toronto.

Suppress the Waist
Depending upon the number of vents your jacket has, the waist can be taken in or ‘suppressed’ to give you a sought after V-shape.
Pants

Length, Cuff & Break Adjusting the length of a pair of pants purchased off the rack is the most common alteration performed by tailors. Most off the rack suit pants will need to be hemmed to an appropriate length. At Love Your Tailor in Toronto we charge roughly $20 for shortening pants. When adjusting the length of your pants, a tailor can also cuff them to give you a more modern look.

Simply put, you should be able to comfortably stand, sit and walk around.
Narrow the Legs If you prefer a more modern, slim look, consider having your tailor pull in the fabric around your shin up through your thigh.
This will narrow the leg of your pants for a more tapered appearance.
Change the Zipper Whether your zipper needs replacement because it is broken, or you simply do not like the style, this is a very common alteration that tailors can do.

Shirts A lot of men do not realize the world of possibilities when it comes to altering dress shirts.
Even shirts you are already wearing can be easily tweaked for a more professional fit.
Shorten the Sleeves The sleeves of a dress shirt can be shortened an inch or two by an experienced tailor.
Replace Cuffs & Collars The collar of your shirt can be easily replaced, although you may need to accept a white collar for contrast.

Shorten Torso Length
The length of your shirt can be easily shortened by a few inches for a better fit.
Slim the Fit

Replace the Buttons When your shirts are being laundered, it can be quite common to discover lost or damaged buttons. Consider asking your tailor to replace all the buttons on your shirt. With a large variety of buttons, our experienced tailors in Toronto can make your shirt look even better than when you bought it by adding more stylish buttons.

What is a shirt with the sleeves cut off called?

When your English is good enough to name the most common pieces of clothing—shirt, pants, underwear—the next step is naming the parts of each piece of clothing. When the time comes to talk about differences in clothing, you’ll want this vocabulary. How else can you tell me how your shirt is different from mine? Let’s start with shirts. Click Here for Step-by-Step Rules, Stories and Exercises to Practice All English Tenses The place where your arms go in your shirt are the shirt sleeves, We talk about short-sleeved shirts and long-sleeved shirts. A long-sleeved shirt has sleeves that come almost all the way to your hands. And a short-sleeved shirt has sleeves that come just over your shoulders. Some shirts have no sleeves. We call them ” tank tops,” though sometimes they’re called ” sleeveless,” though that mostly happens in womens clothing. If you wear a tie, around your neck it’s under the collar of your shirt. The collar is the part of the shirt that your head goes through. Normally, though, we only call it a collar when it rises up around your neck. A t-shirt, for example, doesn’t have a collar. Normally, shirts that have a “collar” like a t-shirt has, we say are ” crew neck,” For example, it’s possible to buy crew neck sweater. Or you can buy a turtleneck sweater. When a shirt—or sweater—has what looks like a third sleeve for your head, it’s a “turtleneck.” I like to wear turtleneck shirts in the winter, because they keep my neck warm. In the summer, I wear short-sleeved shirts with a collar to work. I think they look professional, and they aren’t too warm. (Air conditioning isn’t common in Germany.) The rest of the year, I wear collared shirts with long sleeves. though, even when I wear a sweater, I slide my sleeves up. What kind of shirts do you wear? How do you feel about wearing turtlenecks? Do you think they make you look like a professor? Do you have “work shirts” and “relaxing shirts?” What kind of shirt is your favorite shirt? This lesson was written and recorded by Toby, an American English teacher that lives in Germany. Toby is the creator of Bite Sized English,

Do shirts have to have sleeves?

Sleeves – Shirts may:

have no covering of the shoulders or arms – a tube top (not reaching higher than the armpits, staying in place by elasticity)
have only shoulder straps, such as spaghetti straps
cover the shoulders, but without sleeves
have shoulderless sleeves, short or long, with or without shoulder straps, that expose the shoulders, but cover the rest of the arm from the biceps and triceps down to at least the elbow
have short sleeves, varying from cap sleeves (covering only the shoulder and not extending below the armpit) to half sleeves (elbow length), with some having quarter-length sleeves (reaching to a point that covers half of the biceps and triceps area)
have three-quarter-length sleeves (reaching to a point between the elbow and the wrist)
have long sleeves (reaching a point to the wrist to a little beyond wrist)