How Much Does A Yard Of Dirt Weigh
How Much Does a Yard of Dirt Weigh? Average Topsoil Weight Everything you need to know to plan your next landscaping project and haul your dirt safely You’re driving your pickup to the landscaping supply store for a yard of topsoil to rehab your lawn when the thought hits you—how much is all that dirt going to weigh? Can my truck handle it safely? Did I order enough? The exact weight of a yard of dirt depends on its composition and how wet it is, but the average weights are consistent enough that you can plan your landscaping projects and dirt transportation accurately.

  • A cubic yard of loose, dry topsoil weighs around 2,100 lb (950 kg) depending on its composition. If it’s wet, it can be as much as 3,000 lb (1,400 kg).
  • A yard of topsoil usually costs between $10 and $50 and can cover a 100 square foot (9.3 square meters) area 3 in (7.6 cm) deep.
  • Transport up to 2 cubic yards in a full-size pickup truck yourself, or schedule larger, bulk deliveries in dump trucks.
  1. 1 A cubic yard (0.76 cubic meters) of dry topsoil weighs 2,100 lb (950 kg). This weight is a close estimation since the exact weight varies based on the type of soil, how wet it is, and what kinds of debris, rocks, or mulch are present. Topsoil is the uppermost layer of dirt that usually contains a mixture of sand, silt, clay, and organic matter that can support plant life. If the topsoil is compacted, a yard of it can weigh around 2,700 lb (1,200 kg).
    • 2 yards of topsoil weighs about 4,200 lb (1,900 kg). To find the weight of multiple yards, multiply the weight of 1 yard by the total number of yards you need.
    • A yard of fill dirt (dirt that’s filtered for construction use and doesn’t contain any organic matter) is slightly heavier and weighs about 2,150 lb (980 kg).
    • If the topsoil is dry and sandy, it can weigh around 2,600 lb (1,200 kg) per cubic yard. Clay soil is lighter at around 1,700 lb (770 kg) per cubic yard.
    • Topsoil is used for most home and garden projects like raising flower beds, reshaping lawns, and adding more nutrients to your yard’s soil.
  2. 2 A yard of wet topsoil can weigh up to 3,000 lb (1,400 kg). If the soil is saturated with water after a rainy day, its weight increases dramatically. The moisture holds the bits of soil together and traps the water in the dirt until it slowly evaporates away. When you go out to, go on a dry day when moisture doesn’t impact the weight (it makes it easier to transport home, too).
    • As a general rule, the more moisture the soil contains, the heavier it will be.

    Advertisement

  3. 3 Soil mixed with wood chips or compost weighs less than pure topsoil. Wood chips improve soil drainage, and a cubic yard of just wood chips only weighs around 1,000 lb (450 kg). Compost adds valuable nutrients for planting and weighs in around 1250 lbs (567 kg) per cubic yard. Any mixture of soil and wood chips or compost will be lighter than straight soil, with the exact weight depending on the ratio of soil to other material.
  4. Advertisement

  1. A cubic yard of topsoil costs $10 to $50. The exact price depends on the moisture content, delivery fees, and quality of the soil. Raw topsoil will be on the lower end of the price range, whereas soil that’s been filtered or has additives will be more expensive. If you’re buying in bulk, a 10-15 yard truck load of topsoil costs $150 to $500 (including delivery).
    • Half-yards of topsoil run for $10 to $30 for pickup, and 40 lb (18 kg) bags cost $2 to $6.
    • A cubic yard of fill dirt is generally cheaper and ranges from $7 to $12.
  1. 1 A yard covers 100 square feet (9.3 square meters), 3 in (7.6 cm) deep. To determine how many yards you need for your project, use a online or multiply the depth, width, and length (in feet) of your project area to of soil needed. Divide the number of cubic feet by 27 to get the cubic yards you need. For example:
    • Say you’re filling an area 5 ft (1.5 m) wide, 10 ft (3.0 m) long, and 6 in (15 cm) deep. Multiply 5 by 10 by 0.5 to get 25, then divide by 27 to get 0.93 cubic yards.
  2. 2 A yard of topsoil is equivalent to about 54 standard, Each bag is about 0.5 cubic feet (0.014 cubic meters), and since there’s 27 cubic feet in a cubic yard, this makes 54 bags per yard. This comes out to 2,160 lb (980 kg) of topsoil.
  3. Advertisement

  1. 1 A full-size pickup can haul 2 cubic yards 4,200 lb (1,900 kg) of topsoil. Double check your truck’s hauling capacity before you load it up with soil. If you’re pushing your weight limit, stay off of major highways and Interstates and try to keep your speed under 45 miles per hour (72 km per hour). Drive carefully with loaded trailers because of the risk of fishtailing.
    • Supply yards are usually pretty good at sizing up your truck and only loading a safe amount of material into the bed.
    • Small pickup trucks and trailers can usually haul 1 cubic yard of topsoil.
    • A small dump truck can carry about 5 cubic yards while a large one can haul 10 cubic yards or more.
  2. 2 It takes about 9 wheelbarrow loads to equal 1 yard of topsoil. Most medium-sized hold 3 cubic feet (0.085 cubic meters) of material, meaning you’d need to make 9 wheelbarrow trips back and forth from your topsoil stock to its final location. Each wheelbarrow load would weigh around 230 lb (100 kg), so making more, smaller trips might be easier!
  3. Advertisement

Question How do you order dirt for your yard? Landscape Designer Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices. There are a few ways to buy dirt for your yard. One would be to go to a big box store like Lowe’s or Home Depot. You can buy as many bags as you think you need. This is the more expensive way to do it. Rather than going to a big box store to buy soil, it’s always better to look for your local stone yard or local mulch yard. You could get four times as much soil there for the same cost that you would spend at a big box store. There is a delivery fee for it but that’s the best place to get dirt. Another place you can get dirt from is by searching online. A lot of people do outside projects themselves and either they have dirt that they don’t want to haul somewhere themselves, so they give it away for free, or they order too much and then give it away.

Ask a Question Advertisement

  • Thanks
  • Thanks

Advertisement This article was co-authored by and by wikiHow staff writer,, Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces.

  • Co-authors: 3
  • Updated: June 27, 2023
  • Views: 37,098

Categories:

Thanks to all authors for creating a page that has been read 37,098 times. : How Much Does a Yard of Dirt Weigh? Average Topsoil Weight

How much does a yard of dirt weigh in tons?

How much does a yard 3 of topsoil weigh? – A cubic yard of typical topsoil weighs about 2700 pounds or 1.35 tons. A square yard of a garden with a depth of 1 foot (30.48 cm) weighs about 900 pounds (410 kg) or slightly less than half a ton. The water content of the soil is assumed to be that of a moderately damp (e.g. freshly dug).

How much does a yard weigh?

How Large is a Yard of Dirt or Gravel? Calculate How Much Dirt or Gravel You Need for Your Project When Gravel or Dirt suppliers ask how many yards you need they are talking about a cubic yard. A cubic yard is a measurement that is 3 feet by 3 feet by 3 feet. A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs about 2,200 pounds.

How much does 1 yard of dirt cover?

A general rule of thumb is that one cubic yard of topsoil will cover an area of 10 feet by 10 feet to a depth of 3 inches.

How heavy is dirt?

3. Conclusion – The dirt mixed with topsoil can weigh about 80 pounds or 0.04 short tons per cubic foot which is exactly equal to 2150 pounds per cubic yard. Dirt mixed of loose topsoil can weigh 2100 lbs per yard, topsoil compact 2500 lbs, clay dirt dry 2300 lbs, fill dirt weighs 2150 lbs, and gravel dry 3300 lbs. Dream Civil is a team of Civil Engineers who is working for providing quality education to readers.

How many yards are in 1 ton?

How many yards in a ton of rock? – A cubic yard of rock is equal to 3000 pounds. As a ton weighs around 2000 lbs, thus the number of tons in a cubic yard is 3000/2000 = 1.5 tons. So, in one ton of rock, it contains 0.67 cubic yards of rock, Also Read: Classification of Building Stones

What is 1 yard of dirt?

Bulk Soil. Bulk soil is measured in yards.1 yard equals 27 cubic feet. Think about it as a cube that is 3′ X 3′ X 3′.

How much is a yard in KG?

How many cubic yards are in a kilogram of water? 1 yd 3 / cu yd = 764.55 kg wt.

Is a yard the same as a ton?

How Much Gravel or Soil Do I Need? What Does a Cubic Yard Look Like? Figuring out how much landscaping or construction material you need is a tricky business. Below are some diagrams to help you visualize how much product a pickup truck can carry. We also help you visualize how much various kinds of dump trucks can carry. Why are some materials sold by cubic yards and some sold by tons? A cubic yard is a measure of volume while a ton is a measure of weight. The volume of the space you need to fill will always be the same, but the total weight of the materials you need will vary by the material. For example, a cubic yard of crushed rock is lighter than a cubic yard of topsoil. The reason Washington Rock sells topsoil and sand by cubic yard rather than by ton is that their weight varies with the seasons. Topsoil and sand are heavier during the rainy season when they’re wet but lighter during the dry season. We do calculations throughout the year to figure out how much water the material has absorbed.

  1. Then our team members calculate how much of a ton of material is water weight and subtract that from the total.
  2. Buying topsoil and sand by volume means that you pay for the material rather than the water that’s in it.
  3. That’s especially important in the wet Pacific Northwest.
  4. How many cubic yards of gravel, sand, or topsoil do I need? Check out our article, You can also watch our video below.

This post was originally published on May 18, 2018, and was updated on July 9, 2020; September 27, 2021; and May 10, 2022. For more information about Washington Rock’s rock products,, : How Much Gravel or Soil Do I Need? What Does a Cubic Yard Look Like?

How many kg is a cubic yard of soil?

How Much Does a Yard of Dirt Weigh? Average Topsoil Weight Everything you need to know to plan your next landscaping project and haul your dirt safely You’re driving your pickup to the landscaping supply store for a yard of topsoil to rehab your lawn when the thought hits you—how much is all that dirt going to weigh? Can my truck handle it safely? Did I order enough? The exact weight of a yard of dirt depends on its composition and how wet it is, but the average weights are consistent enough that you can plan your landscaping projects and dirt transportation accurately.

  • A cubic yard of loose, dry topsoil weighs around 2,100 lb (950 kg) depending on its composition. If it’s wet, it can be as much as 3,000 lb (1,400 kg).
  • A yard of topsoil usually costs between $10 and $50 and can cover a 100 square foot (9.3 square meters) area 3 in (7.6 cm) deep.
  • Transport up to 2 cubic yards in a full-size pickup truck yourself, or schedule larger, bulk deliveries in dump trucks.
  1. 1 A cubic yard (0.76 cubic meters) of dry topsoil weighs 2,100 lb (950 kg). This weight is a close estimation since the exact weight varies based on the type of soil, how wet it is, and what kinds of debris, rocks, or mulch are present. Topsoil is the uppermost layer of dirt that usually contains a mixture of sand, silt, clay, and organic matter that can support plant life. If the topsoil is compacted, a yard of it can weigh around 2,700 lb (1,200 kg).
    • 2 yards of topsoil weighs about 4,200 lb (1,900 kg). To find the weight of multiple yards, multiply the weight of 1 yard by the total number of yards you need.
    • A yard of fill dirt (dirt that’s filtered for construction use and doesn’t contain any organic matter) is slightly heavier and weighs about 2,150 lb (980 kg).
    • If the topsoil is dry and sandy, it can weigh around 2,600 lb (1,200 kg) per cubic yard. Clay soil is lighter at around 1,700 lb (770 kg) per cubic yard.
    • Topsoil is used for most home and garden projects like raising flower beds, reshaping lawns, and adding more nutrients to your yard’s soil.
  2. 2 A yard of wet topsoil can weigh up to 3,000 lb (1,400 kg). If the soil is saturated with water after a rainy day, its weight increases dramatically. The moisture holds the bits of soil together and traps the water in the dirt until it slowly evaporates away. When you go out to, go on a dry day when moisture doesn’t impact the weight (it makes it easier to transport home, too).
    • As a general rule, the more moisture the soil contains, the heavier it will be.

    Advertisement

  3. 3 Soil mixed with wood chips or compost weighs less than pure topsoil. Wood chips improve soil drainage, and a cubic yard of just wood chips only weighs around 1,000 lb (450 kg). Compost adds valuable nutrients for planting and weighs in around 1250 lbs (567 kg) per cubic yard. Any mixture of soil and wood chips or compost will be lighter than straight soil, with the exact weight depending on the ratio of soil to other material.
  4. Advertisement

  1. A cubic yard of topsoil costs $10 to $50. The exact price depends on the moisture content, delivery fees, and quality of the soil. Raw topsoil will be on the lower end of the price range, whereas soil that’s been filtered or has additives will be more expensive. If you’re buying in bulk, a 10-15 yard truck load of topsoil costs $150 to $500 (including delivery).
    • Half-yards of topsoil run for $10 to $30 for pickup, and 40 lb (18 kg) bags cost $2 to $6.
    • A cubic yard of fill dirt is generally cheaper and ranges from $7 to $12.
  1. 1 A yard covers 100 square feet (9.3 square meters), 3 in (7.6 cm) deep. To determine how many yards you need for your project, use a online or multiply the depth, width, and length (in feet) of your project area to of soil needed. Divide the number of cubic feet by 27 to get the cubic yards you need. For example:
    • Say you’re filling an area 5 ft (1.5 m) wide, 10 ft (3.0 m) long, and 6 in (15 cm) deep. Multiply 5 by 10 by 0.5 to get 25, then divide by 27 to get 0.93 cubic yards.
  2. 2 A yard of topsoil is equivalent to about 54 standard, Each bag is about 0.5 cubic feet (0.014 cubic meters), and since there’s 27 cubic feet in a cubic yard, this makes 54 bags per yard. This comes out to 2,160 lb (980 kg) of topsoil.
  3. Advertisement

  1. 1 A full-size pickup can haul 2 cubic yards 4,200 lb (1,900 kg) of topsoil. Double check your truck’s hauling capacity before you load it up with soil. If you’re pushing your weight limit, stay off of major highways and Interstates and try to keep your speed under 45 miles per hour (72 km per hour). Drive carefully with loaded trailers because of the risk of fishtailing.
    • Supply yards are usually pretty good at sizing up your truck and only loading a safe amount of material into the bed.
    • Small pickup trucks and trailers can usually haul 1 cubic yard of topsoil.
    • A small dump truck can carry about 5 cubic yards while a large one can haul 10 cubic yards or more.
  2. 2 It takes about 9 wheelbarrow loads to equal 1 yard of topsoil. Most medium-sized hold 3 cubic feet (0.085 cubic meters) of material, meaning you’d need to make 9 wheelbarrow trips back and forth from your topsoil stock to its final location. Each wheelbarrow load would weigh around 230 lb (100 kg), so making more, smaller trips might be easier!
  3. Advertisement

Question How do you order dirt for your yard? Landscape Designer Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices. There are a few ways to buy dirt for your yard. One would be to go to a big box store like Lowe’s or Home Depot. You can buy as many bags as you think you need. This is the more expensive way to do it. Rather than going to a big box store to buy soil, it’s always better to look for your local stone yard or local mulch yard. You could get four times as much soil there for the same cost that you would spend at a big box store. There is a delivery fee for it but that’s the best place to get dirt. Another place you can get dirt from is by searching online. A lot of people do outside projects themselves and either they have dirt that they don’t want to haul somewhere themselves, so they give it away for free, or they order too much and then give it away.

Ask a Question Advertisement

  • Thanks
  • Thanks

Advertisement This article was co-authored by and by wikiHow staff writer,, Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces.

  • Co-authors: 3
  • Updated: June 27, 2023
  • Views: 37,098

Categories:

Thanks to all authors for creating a page that has been read 37,098 times. : How Much Does a Yard of Dirt Weigh? Average Topsoil Weight

How big is 20 yards of dirt?

A cubic yard is a dirt pile 3 feet wide, 3 feet long and 3 feet tall, so 20 cubic yards is a pile 15 feet long, 12 feet wide, and 3 feet tall.

How much material is a yard of dirt?

What Is a Cubic Yard? – A cubic yard (yd 3 ) is a measurement of volume in the U.S. Customary and Imperial systems of measurement. It is determined by multiplying length x width x height/depth. One cubic yard is equal to 27 cubic feet.

Cost Comparison by Cubic Yard: Fill dirt, Topsoil, Sand
Fill Dirt $5-$15 per cubic yard
Topsoil $10-$55 per cubic yard
Sand $15-$40 per cubic yard

How big is a tonne of dirt?

How many cubic feet are in a ton of soil? – 1 tonne of packed topsoil measures roughly 24.7 cubic feet- that’s just under 3 feet along each plane- much heavier than it looks! Got any more questions about topsoil? Contact our team to learn more about how topsoil can help your garden prosper. : Topsoil Calculator

Why is dirt so heavy?

Sign up for Scientific American ’s free newsletters. ” data-newsletterpromo_article-image=”https://static.scientificamerican.com/sciam/cache/file/4641809D-B8F1-41A3-9E5A87C21ADB2FD8_source.png” data-newsletterpromo_article-button-text=”Sign Up” data-newsletterpromo_article-button-link=”https://www.scientificamerican.com/page/newsletter-sign-up/?origincode=2018_sciam_ArticlePromo_NewsletterSignUp” name=”articleBody” itemprop=”articleBody”> Key concepts Geology Soil Density Ecology Introduction Have you ever noticed how much work it is to dig a hole in really hard soil? It’s much easier to dig a hole in soft, loose soil. But why is that? Soil that is hard and dry is often compacted, which means that it has been packed down, making it denser and thereby difficult to penetrate. Soil that has become compacted is not only harder for you to dig a hole in, but it can also be much harder for a lot of other organisms, such as helpful earthworms, to survive in. Background Just as it is difficult for you to dig in compacted soil, it is also difficult for soil-dwelling organisms, like bugs and worms, to tunnel in compacted soil. You won’t usually find many organisms living in compacted soils because they cannot get the air, space and nutrients they need to survive. Also, compacted soil makes it difficult for plants with delicate root systems to thrive. Very compacted soil tends to support only the growth of weeds, which have thick tap roots that can penetrate deeply into compacted soil and out-compete other plants. Some areas are more susceptible to soil compaction than others. For example, the number of people and other animals that walk in an area—in other words, the amount of “foot traffic”—can affect how compacted the soil is there. The quantity of sunlight and moisture can also affect how susceptible an area is to compaction. Materials • Small spool of thread • Metal knitting needle (small enough to fit inside the spool hole) • Permanent marker • Patches of soil in different locations to test for compaction • Rubber band • Measuring tape or ruler • Sheet of paper and pencil or pen Preparation • Place the knitting needle into the small spool to make sure it fits. • With the needle inside the spool, place both (pointy side down) onto a table. Mark on the knitting needle the point where it sticks out of the top of the spool with your permanent marker. • Choose a variety of different locations to test the soil for compaction, such as areas that get different amounts of foot or animal traffic, places that receive different amounts of moisture or sunlight, and patches that have lots of plants versus those that have none. Procedure • Take your needle and spool apparatus, along with a rubber band outside to the first location you chose to test the soil for compaction. • Place the spool on the ground with the needle in it, pointy side down. Push hard on the needle until it stops penetrating the ground. • If the needle goes into the ground easily and could be pushed past the top of the spool, simply stop pushing when the needle reaches the spool top. • Tightly wrap the rubber band around the top of the knitting needle (the blunt end). Slide the rubber band down the shaft until the rubber band touches the top of the spool. • Pull the needle from the ground, making sure to keep the rubber band in the same place. Measure the distance between the rubber band and the marked line. How deep could you push the needle into the ground? Write this on your sheet of paper. • Go to the other test locations you chose and repeat this process to find out how compact the soil is. The more compact the soil is the harder it will be to push the needle into the ground. • Where was the soil most compacted? Where was the soil least compacted? What characteristics did you notice about the most compact soils? What characteristics did you notice about the least compact soils? Think about factors such as foot traffic, soil type, moisture, exposure to sunlight and plant covering. • Extra: Investigate the effect of walking on soil compaction by digging up some soil so that it is loose. First measure its compaction with your spool-and-needle apparatus, then walk over the site and measure the compaction again. How did the soil’s density change? If you walk over the site more, will the compaction continue to change? • Extra: Test whether wet or dry soils become more compacted by adding different amounts of water to dry soil and compacting it with a tamper or roller. Compact a sample of dry soil in the same way. Measuring each sample with your spool-and-needle apparatus, which soils are the most compacted? What happens if you let them dry out and measure them again afterward? Observations and results Were some soils you tested more compacted than others? Did you find that the areas that received a lot of foot traffic were the more compacted? Were dry areas more compacted than moist areas? Did more compacted areas have fewer plants? As soil is pressed down, such as by humans and other animals walking over it, it becomes compacted, or denser. This is why areas that receive a lot of foot traffic or areas that are driven over by vehicles are more susceptible to becoming compacted. When soil becomes too dense many organisms such as bugs, worms and some plants will be unable to live there. This is in part because it is harder for oxygen and water to penetrate into highly compacted soil. The lack of moisture can cause compacted soil to become dry, and you may have found that dry areas were denser than moist ones. What other qualities did you notice about soils that had different levels of compaction? Cleanup Clean the knitting needle with soap and water. More to explore Soil Compaction from Colorado State University Recoverability and Vulnerability of Desert Ecosystems: Soil Compaction from the U.S. Geological Survey Soil Compaction from Science Buddies This activity brought to you in partnership with Science Buddies

Is dirt heavier than sand?

Sand: – Sand is a loose granular material commonly found on beaches, riverbeds and deserts. It can be of different colours like white, black, and green depending on the location. The sand is a mixture of small grains of rock that ranges from 0.0625 to 2 mm in size.

Soil Sand
It is the topmost surface layer of the Earth. It is a type of soil made of a loose granular material or small grains of rock that ranges from 0.0625 to 2 mm in size.
It is more organic than that of sand. It is less organic in nature than soil.
It is made of organic material, air, water and solids. It is made of silica, calcium carbonate and other minerals.
It is porous in nature. It is non-porous in nature.
It holds water. It does not hold water.
Water or other liquids do not drain easily through soil. Water and other liquids drain easily through sand.
It is heavier than sand. It is lighter than soil.
Its types include clay, slit and sand. Its types include coral sand, glass sand, gypsum sand etc.
The most common component of soil is organic matter. The most common component of sand is silicon dioxide.
It can be of white, red, brown or black colour depending on the location and its components. It can be white, black, brown or green in colour depending on the location and the rock it is made of.

Next Topic

For Videos Join Our Youtube Channel:

Send your Feedback to

: Difference between Sand and Soil

What is 100 yards in tons?

Cubic Yard to Ton Register Conversion Table

Cubic Yard Ton Register
20 yd^3 5.4 ton reg
50 yd^3 13.5 ton reg
100 yd^3 27 ton reg
1000 yd^3 270 ton reg

Can you convert yards to tons?

To convert Cubic Yards to Tons*: Cubic Yards x 1.4 = Tons. To convert Tons to Cubic Yards*: Tons ÷ 1.4 = Cubic Yards.

How many yards is 50 tons?

Ton Register to Cubic Yard Conversion Table

Ton Register Cubic Yard
10 ton reg 37.037037037 yd^3
20 ton reg 74.0740740741 yd^3
50 ton reg 185.1851851852 yd^3
100 ton reg 370.3703703704 yd^3

How many tons of dirt are in a yard?

As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

How do I calculate yards of dirt?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.

Is dirt measured in yards or tons?

What Amounts Does Dirt Come In? – Measuring dirt isn’t done by simply getting out a tape measure and measuring out the length and width of the space. Dirt is most often measured in cubic yards, and the application of this amount depends on several different factors.

Picture it like this: Imagine an empty cube that has sides of 1 yard. Fill that empty cube up with dirt, and you have a cubic yard.1 cubic foot equals 12 inches x 12 inches x 12 inches, while 1 cubic yard equals 27 cubic feet. Make sense? When you acquire 1 cubic yard of dirt, you are acquiring 27 cubic feet.

This obviously differs from square footage, which is how properties are usually measured.

How many yards of dirt is 50 tons?

Ton Register to Cubic Yard Conversion Table

Ton Register Cubic Yard
20 ton reg 74.0740740741 yd^3
50 ton reg 185.1851851852 yd^3
100 ton reg 370.3703703704 yd^3
1000 ton reg 3703.7037037037 yd^3

How do you convert yards of dirt to tons?

Use this calculator for mulch and leaf composite products to calculate how many Cubic Yards you will need. *For sand and rock products, you will use Total Tons below. Shape Selection:

Length (feet):
Width (feet):
Depth (inches):
Cubic Yards:
Total Tons*:

How to figure rectangle manually:

Length x Width = Square Feet Square Feet ÷ “X” = Cubic Yards (to find “X,” match depth with number in table below) To convert Cubic Yards to Tons*: Cubic Yards x 1.4 = Tons To convert Tons to Cubic Yards*: Tons ÷ 1.4 = Cubic Yards

* 1.4 is a rule of thumb that will work for most sand and gravel products (1 yard = 2,800#). Some products such as soils and mixes may vary due to their different bulk densities (weight per cu. yd).

table>

Example 1: 2,000 Square Ft. bunker at 6″ deep 2,000 ÷ 54 = 37 Cubic Yards Bunker Sand 37 x 1.4 = 52 Tons Example 2: To cover cart path 1,200′ x 4′ x 3″ deep 1,200 x 4 = 4,800 square feet 4,800 ÷ 108 = 44.5 cubic yards gravel 44.5 x 1.4 = 63 tons

table>

Inches deep “X” 1″ 324 2″ 162 3″ 108 4″ 81 5″ 65 6″ 54 7″ 47 8″ 40 9″ 36 10″ 33 11″ 30 12″ 27

How many tons of fill dirt in a yard?

Search for Available Products in your Area – You may view our complete product mix with just your address, but some materials have limited geographic availability. We sell all of our online materials by the cubic yard. A cubic yard is equal to 27 cubic feet. Length Width Height

How much ground does 1 ton of dirt cover?

Product Coverage Chart

Material Amount Coverage *(3′ depth)
Driveway and Paver Base (Class 2, Class 5) 1 ton covers 65-75 sq. ft. *
Sand 1 ton covers 70-80 sq. ft. *
Topsoil 1 yard covers 100-110 sq. ft. *
Mulch 1 yard covers 100-110 sq. ft. *