Mulch Calculator – 1 Measure the length and width, or the diameter, of the area to be mulched. Tip: For irregularly shaped beds, break them into rough rectangles and circles. Then calculate the mulch needed for each section and add them for the total mulch needed.3 Enter the measurements: Length of area (in feet) Width of area (in feet) Depth of mulch (in inches; we recommend 2-4″) Here’s what you need: cubic yards of mulch ( cubic feet) Note that one cubic yard of mulch (often just called “a yard”) is 27 cubic feet.

Contents

- 1 How many bags of mulch equal 4 yards?
- 2 How much does 10 bags of mulch cover?
- 3 How many bags of mulch is 2 yards?
- 4 How much mulch do I need for 3 yards?
- 5 How deep should mulch be?
- 6 How many bags is a yard?
- 7 How many mulch bags do I need?
- 8 How much mulch will a 2 inch thick yard cover?
- 9 How much ground does a bag of mulch cover?
- 10 How many yards of mulch fit in a 6ft bed?

### How many bags of mulch is 6 yards?

How many cubic yards are 60 bags of mulch? – Mulch comes in 2 cubic feet and three cubic feet-sized bags. If you bought 60 bags of mulch that cover two cubic feet, it would equal 4.444 cubic yards. If you purchased 60 bags of mulch that cover three cubic feet, it would equal 6.667 yards.

## How many bags of mulch equal 4 yards?

I’ve Always Bought Mulch in Bags, Why Should I Buy Bulk? Customers who have a history of buying bags of mulch are often intimidated by the prospect of buying mulch in bulk. It can be confusing to figure out how much you need, and how you are going to get it spread.

- The Mulch Yard has solutions! Q: How do I convert bags to cubic yards? A: There are 27 cubic feet in a cubic yard.
- Most bagged mulch is sold in 2 cubic foot bags.
- So, for every 13.5 bags, you need one cubic yard.
- Example: If you used 54 bags last year, you would get the same amount of mulch in 4 cubic yards.

Q: Is it cheaper to ? A: YES!! We price checked the big box stores, and the cheapest we could find bagged mulch was still more expensive than our mulch on every variety. Q: Are there any hidden charges? A: No. If you pick up your mulch from us, the only charge is the cost of the mulch, and we even built tax into our price, so you know exactly how much you are going to pay.

You may opt to have it delivered or spread for an additional (reasonable) fee. Q: Is there a way to figure out how much mulch I need without knowing how many bags I used last year? A: Yes. All you have to do is figure out the square footage of your beds (length X width), and then divide that number by 81.

Example: My flower bed is 40 ft long and 10 ft wide. The square footage comes to 400 sq ft. So, we divide 400 by 81, which comes to 4.93. We round up, to make sure we have a little extra, and order 5 cubic yards of mulch. Q: Can I get someone to spread the mulch for me? A: Yes! The Mulch Yard offers, for $30 per cubic yard.

## How much does 10 bags of mulch cover?

Mulches

Mulch At 2 Inches Deep | |
---|---|

2 cf Bags | Square Feet Covered |

1 Bag | 12 Sq. Feet |

5 Bags | 60 Sq. Feet |

10 Bags | 120 Sq. Feet |

#### How many bags of mulch is 5 yd?

Number of bags for Cubic yard Equivalence | ||
---|---|---|

1 Cu. Yd | 5 Cu. Yds. | |

1 Cu. Ft. Bag | 27 | 135 |

1.5 Cu. Ft. Bag | 18 | 90 |

2 Cu. Ft. Bag | 14 | 70 |

## How many bags of mulch is 2 yards?

The most common bagged mulch comes in 2 cubic foot bags. As a result, you’ll need one cubic yard for every 13.5 bags. For example, if you used 27 bags of mulch last year, you’ll get the same amount of mulch in 2 cubic yards this year. A single cubic yard of mulch will cover 162 square feet at 2 inches of depth.

## How much mulch do I need for 3 yards?

How Much Mulch Do I Need? – A 2″ depth of organic mulch is ideal to retain moisture and keep down weeds, says Esslinger. But don’t go overboard: This is one time when more is not necessarily better. Plant roots need air to survive, and too deep a layer can suffocate roots and cause water to shed off the top of mulch instead of filtering through and soaking into the soil below.

- The maximum depth you should apply depends on the type: Finely textured mulch, like shredded hardwood, shouldn’t be more than 3″ deep.
- Coarse textures, such as pine bark nuggets, allow more air movement so you can go up to 4″ deep.
- First, figure out the square footage of your bed.
- Multiply width by length for square or rectangular beds—or for round beds, multiply the radius (distance from the middle to the edge of the bed) by itself, and then multiple that total by 3.14.

Keep in mind that mulch is sold by the cubic yard. One cubic yard of the material covers a 324-square-foot area an inch deep. So, to determine your total, multiply your square footage by the depth in inches desired, then divide by 324. Here’s your formula: Square footage x desired depth / 324 = cubic yards needed. Design: Emily Schiff-Slater Or, plug your measurements into an automatic mulch calculator. Lowe’s has a good one, as does this website, The Best Mulch to Use Organic mulch means any type of natural substance that decomposes over time such as bark, wood chips, or pine needles.

Straw is ideal for vegetable gardens. Replace mulch as needed, which is usually annually for fine or shredded types or every two to three years for coarser types like bark chips. Color is a personal preference. Not all mulch is created equally. Avoid getting mulch from places such as your municipality’s transfer station, where yard waste is ground up and offered free to residents.

For starters, you have no idea what’s in there. It may contain wood chips that are detrimental to other plants (for example, walnut trees contain a natural chemical that can inhibit growth). It also may include weed seeds and grass clippings that have been treated with herbicides.

#### What is 1 yard of mulch?

Mulch Calculator – 1 Measure the length and width, or the diameter, of the area to be mulched. Tip: For irregularly shaped beds, break them into rough rectangles and circles. Then calculate the mulch needed for each section and add them for the total mulch needed.3 Enter the measurements: Length of area (in feet) Width of area (in feet) Depth of mulch (in inches; we recommend 2-4″) Here’s what you need: cubic yards of mulch ( cubic feet) Note that one cubic yard of mulch (often just called “a yard”) is 27 cubic feet.

### How do you calculate mulch bags?

How to Calculate How Much Mulch I Need – The first step to calculate the mulch needed is figuring out the how many square feet the potential bed covers. Simply multiply the length by the width if the bed is rectangular or square, or for a round bed, multiply the square of the radius (distance from the center of the bed to its edge in a straight line) by 3.14.

Next, the area in square feet should be multiplied by the desired depth in inches of mulch material to be utilized. To calculate mulch in yards, it is essential to note that one cubic yard of material will cover an area of 324 square feet at a depth of an inch. To determine the total amount of mulch needed, the formula is: Square footage x desired depth (in inches)/ 324.

A landscape mulch calculator like the one above can help with your calculations. For example, to achieve mulch coverage for a bed with an area of 300 square feet at a depth of two inches: 300 x 2 / 324 = 1.85 cubic yards. The value obtained after calculation should be rounded up to the nearest whole number.

### How do you calculate mulch quantity?

Mulch Calculator – Gardening Australia

Unless you work in the industry, it’s hard to picture how much a cubic metre is.Costa has a great tip to make ordering mulch and soil easier.Work out the size of the garden bed you want to cover and multiply this by the depth you need.Say your garden bed is about 3metres wide by 3metres long, then you multiply 3×3 and know you have 9 square metres to cover.

Next comes the depth. If you want mulch that is, say, 10cm (or 0.1metres) deep then you multiply the size of the garden bed by 0.1m. For your 3×3 bed, that means 3x3x0.1 = 0.9metres, which is just under a cubic metre. Another way to picture a square metre is to remember it is about 10 good-sized wheelbarrows full. Broadcast 24 May 2019 24 May 2019 Fri 24 May 2019 at 9:30am : Mulch Calculator – Gardening Australia

#### How much does a 50L bag of mulch cover?

Packaged Mulch Tea Tree 50L Bag (covers approx 4m2 ) : BCSands Online Shop – Building and Landscape Supplies, we supply Sydney’s best!

#### How much mulch do I need for 200 square feet?

Or measure the cubic feet needed and divide by 27: – So measure your area to be covered in feet. Say you have a foundation area to be mulched that is 5 feet by 40 feet. Multiply 5 x 40=200 sq ft. You want it 3 inches deep. Multiply the 200 sq ft by,25 ft (3 inches is 3/12 or 1/4 of a foot) = 50 cubic feet. Divide by 27 to get cubic yards – 50 divided by 27 = 1.85 yards. You need two cubic yards.

#### How much does a 50 pound bag of mulch cover?

Covers 1000 sq ft.

## How deep should mulch be?

How Much Mulch to Use – One reason to apply mulch is to control and kill weeds. However, the mulch can do the same to your desired plants, so don’t pile too much on them. Knowing how much mulch to use can be tricky. A 1-inch to 2-inch layer of fine mulch should be sufficient, while a coarser material should be 3 to 4 inches deep.

Too much of either type can suffocate your plants. In areas where you simply want to keep anything from growing, you can lay it on as thick as you like. Coverage will vary greatly based on what type of mulch you use and how deeply you layer it. To prevent stems and bark from rotting, pull mulch 1 to 2 inches away from woody stems and tree trunks.

Also, if mulch is touching the plants, pests — such as mice and slugs — can find a great hiding place and a free lunch. A pre-shaped mulch tree ring is an option to place around trunks. Mulch that’s too deep will stimulate root growth in the mulch layer rather than in the ground.

## How many bags is a yard?

How to Calculate Cubic Yards

- To figure out how many cubic yards of product that you need for your
- project, follow these few simple steps.
- Take how deep you are putting the product (3″, 4″ 9″, etc) and divide that by 12.
- Take your square footage for the area and multiply by the above total.
- Then divide that total into 27.
- This will give you your cubic yards.*

Example. If you have an area that the square footage is 100 square feet and you want the product 4″ deep.4 /12 =,3333 (depth divided into 12″) 100 X,3333 =33.33 (Square feet multiplied by depth) 33.33 / 27 = 1.2344 (converted into yards)

- You would need 1-1/4 yards of product.
- If you are buying bags and not loose bulk product,
- this is how many bags you will need for a cubic yard.

,5 cubic foot bag it takes 54 bags to equal a cubic yard.1 cubic foot bag it takes 27 bags to equal a cubic yard.1.5 cubic foot bag it takes 18 bags to equal a cubic yard.2 cubic foot bag it takes 13.5 bags to equal a cubic yard. * Note. Product size ( small bark to large bark) since they not the same may not cover the same size area due to product size differences.

## How many mulch bags do I need?

How Much Does a Bag of Mulch Cover? –

- Mulch is typically sold in bags of 50 L or 2 cubic feet. To cover a 200 sq. ft. garden with mulch 4 inches deep, you would need about 38 50 L bags of mulch, or 34 2cu ft bags.
- Be sure to consider the area of the garden bed that will be taken up by plants, and subtract that from your calculation.

### How many bags of mulch do I need for a 100 square feet?

How Many Bags of Mulch Do You Need for 150 Square Feet? – For 150 square feet at 2 inches deep, you will need thirty-two bags of 0.8 cubic feet of mulch or twenty-five bags of 1 cubic feet of mulch or seventeen bags of 1.5 cubic feet of mulch or thirteen bags of 2 cubic feet of mulch or nine bags of 3 cubic feet of mulch.

Mulch Depth in Inches | Number of 0.8 Cu.ft. Bag | Number of 1 Cu. Ft. Bag | Number of 1.5 Cu. Ft. Bag | Number of 2 Cu. Ft. Bag | Number of 1 Cu. Ft. Bag |
---|---|---|---|---|---|

1 inch | 17 | 13 | 9 | 7 | 5 |

2 inches | 32 | 25 | 17 | 13 | 9 |

3 inches | 48 | 38 | 26 | 19 | 13 |

4 inches | 63 | 50 | 34 | 25 | 17 |

Number of Bags of Mulch Needed for 150 Square Feet Garden Bed

## How much mulch will a 2 inch thick yard cover?

How do I know how many yards to purchase?

Depth | 1 Cubic Yard Covers |
---|---|

1″ | 324 Sq. Ft. |

2″ | 162 Sq. Ft. |

3″ | 108 Sq. Ft. |

4″ | 81 Sq. Ft. |

## How much ground does a bag of mulch cover?

Wood Mulches – Cypress mulch All types of organic wood mulches cover the same approximate area, depending on the installed thickness, though the weight of each bag is dependent on whether the mulch is wet or dry. The average weight of a bag of dry shredded wood mulch is approximately 20 pounds, which can almost double in weight when saturated with water.

- One bag installed at 2 inch thickness covers 12 square feet.
- One bag installed at 4 inch thickness covers 6 square feet.

Organic wood mulches come in various colors and types, with some treated with insecticides to repel insects such as termites. Some common types include various shredded hardwoods, shredded eucalyptus, and pine bark nuggets.

### What area does 100 Litres of bark cover?

Landscape Bark Chips – 100 Litre BALE – TFM Farm & Country Superstore £ 8.75 incl. VAT ( £ 7.29 ex VAT) This product carries a discount for bulk orders – please call for details 35 Bags per pallet Approximate coverage per 100 litres = 4m² on a 2.5cm deep bark ground coverage, or 2m² on a 5cm deep bark ground coverage. : Landscape Bark Chips – 100 Litre BALE – TFM Farm & Country Superstore

#### How much mulch do I need for 500 square feet?

For example, if your bed is 50 feet long by 10 feet wide, the square footage is 500 square feet. If you want the mulch to be 2 inches deep, you’ll need 3 cubic yards of mulch.

### How long does mulch last?

Mulch: How Long? – There are two kinds of life-time for mulch. There’s the practical life-time; how long it continues to do its job for. Then there’s the aesthetic life-time; how long it looks good for. The practical life-time of mulch can be anywhere from 4-7 years.

This is how long it takes for a layer of mulch to completely break down, although it depends on a number of different environmental factors (e.g. in direct sunlight, covering very wet ground etc). But really, it is mulch’s job to break down and feed your beds. Therefore, throughout the entire degradation process, it’s constantly producing exothermic heat and providing ground cover to protect against the elements.

Not forgetting helping to prevent weeds so making your gardening tasks a little easier! Our blog here talks about why autumn is a great time to apply mulch for more useful tips to keep your garden booking great all year round. The aesthetic life-time of mulch is much shorter – between 1-2 years.

#### How much will 6 cubic yards of mulch cover?

What product should I use when starting or building up a plant bed? – Our Landscape Soil is perfect for starting beds. It is a rich blend of 50% compost and 50% topsoil (sand, silt, clay-considered a sandy loam blend). The compost is made from food grade production residuals. One cubic yard of soil covers 100 square feet at a 2 inch depth.

#### How many yards is 65 bags of mulch?

Find out How Many Bags of Soil, Mulch, or Compost You Need – If you aren’t able to purchase or haul your materials in bulk amounts, you can calculate how many bags to buy based on the total cubic yards of mulch you need. Retailers usually sell soil and mulch by the 1 or 2 cubic feet amounts, but even if they don’t, you can quickly determine how many bags to buy.

# Cubic Yards Needed | Bag Size | |||

,75 Cubic Feet | 1 Cubic Foot | 1.25 Cubic Feet | 2 cubic Feet | |

1/2 Yard | 18 bags | 14 bags | 11 bags | 7 bags |

1 Yard | 36 bags | 27 bags | 22 bags | 14 bags |

3 Yards | 108 bags | 81 bags | 65 bags | 41 bags |

10 Yards | 360 bags | 270 bags | 216 bags | 135 bags |

Don’t want to do the math? Most soil yards or landscaping sites have an online calculator you can use. Find them by typing “calculate cubic yards” in your browser search box.

#### How many square feet will 6 yards of mulch cover?

Mulch Calculator | Mulch-n-More – Wilbraham Massachusetts How much mulch should I buy? As a general rule of thumb, one cubic yard of bark mulch will cover an area measuring about 80 square feet, Most landscape professionals recommend a minimum depth of about 4 inches,

Simply enter the required dimensions ( YELLOW highlighted boxes) into the desired calculator. Press ENTER to calculate the required amount of mulch.

: Mulch Calculator | Mulch-n-More – Wilbraham Massachusetts

## How many yards of mulch fit in a 6ft bed?

Soil Building Systems, Organic Compost, Hardwood Mulch, Dallas, TX The bed of a full size standard pickup has dimensions of: 8′ long X 5.33′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material. The following chart outlines some additional common capacities of the full-sized pickup truck.

Depth of material loaded in pickup bed | Capacity |
---|---|

26.5 inches deep | 3.5 cubic yards |

22.8 inches deep | 3.0 cubic yards |

19 inches deep | 2.5 cubic yards |

15.2 inches deep | 2.0 cubic yards |

11.4 inches deep | 1.5 cubic yards |

7.6 inches deep | 1.0 cubic yards |

3.8 inches deep | ½ cubic yards |

The bed of a standard short-bed pickup has dimensions of: 6′ long X 4.5′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 1.5 cubic yards of material. The following chart outlines some additional common capacities of the short-bed pickup truck.

Depth of material loaded in pickup bed | Capacity |
---|---|

18 inches deep | 1.5 cubic yards |

12 inches deep | 1.0 cubic yards |

6 inches deep | ½ cubic yards |

Do you have a different sized pickup bed? Click to determine your cubic yard capacity. : Soil Building Systems, Organic Compost, Hardwood Mulch, Dallas, TX